Time to Spend |30 Minutes - 1 Hour
Finished Size |10 x 1 x 6.5 cm
BEAM, AI, SVG
Bring back the old mixtape tradition and gift your friends curated playlists! You will receive a ".Beam.", SVG(and AI) file with all the parts to cut the cassette out of 3mm plywood as well as instructions on how to generate a QR code for your playlist to use in your finished design. The assembly should be pretty self-explanatory, but if you need any help just send me a message. The fit should be pretty tight and hold together, but I still recommend using glue to assemble all parts and make it sturdy. There are some tiny corner pieces that is added in between the finger joints in the corners to give the finished curved look. These are held in place by the other parts. The bottom parts of the inner pull-out layer needs to be glued in place. You can use the same 3mm plywood for these parts, but I also sometimes use 4mm plywood or a slightly different wood to give it a bit of contrast. As for engraving I recommend doing a few test on power/speed to ensure maximum readability.