Designed by
Noviceworkshop
$ 3.17
Ador, beamo, Beambox, Beambox Pro, Cricut, Glowforge, HEXA, Lazervida, Silhouette
Intermediate
Time to Spend |Less Than 30 Minutes
Finished Size |21 x 21 x 10 cm3
AI, STL
●introduction: this is a drawing machine composed of gears and connecting rods. the pen tip rotates with the mechanism by hand-cranking to draw interwoven geometric patterns. you can draw different geometric patterns by adjusting the arm length! come and try it! (note: this work requires 3d printing to make two small parts.) ●reference video: https://youtu.be/dphbdhuyspu ●required materials: 1. 3mm dense version, laser cutting: drawing_machine_v1.ai 1.3d printing: foot*2 pen_holder*1 2.m5 screw 15mm*3, m5 screw 25mm*1, m5 nut*3, m5 gasket*3 3.m3 screw 20mm*4, m3 screw 10mm*1, m3 nut*4 4. hot melt glue or three-second glue (fix pen_holder to the connecting rod) 6. colored pen, ballpoint pen, the pen holder is about 8mm thick 7. round paper, within 11 cm in diameter, it is recommended to use 3m finishing glue to stick to the device all files included in this project: 1.drawing_machine_v1.ai 2.foot.stl 3.pen_holder.stl